Help - weird behaviour on some furniture

Post your LightUp images here!
cdl911
Posts: 14
Joined: Fri Nov 09, 2012 9:11 pm

Help - weird behaviour on some furniture

Postby cdl911 » Thu Jul 27, 2017 10:28 am

OK so i have had some difficulty in delivering an accurate lighting effect on the chairs as depicted in the attachment. Any thoughts or contributions and suggestions gladly received. The attached is a 10cm render with AO.

I am running Sketchup 2015 (15.3.331 64bit) with Lightup v4.6
Am i correct in thinking that since I have a perpetual license I cannot get v5, and therefore cannot upgrade my Sketch Up?

The issue is that these white chairs show black areas when light with a fixture from above and in front.

Thanks in advance for any ideas I can try.
Attachments
chairs.JPG
chairs.JPG (21.79 KiB) Viewed 4873 times

LeeAnderson
Posts: 10
Joined: Thu Oct 04, 2012 10:01 pm

Re: Help - weird behaviour on some furniture

Postby LeeAnderson » Sat Jul 29, 2017 5:31 pm

You could try right-clicking on a chair and selecting LightUp-Vertex Lit from the context menu. If it works, do that to each chair.

Is the chair from the 3DWarehouse? If so, which one? The chairs on 3D Warehouse have no quality control and, though they may look ok in SketchUp, may be badly formed with reversed/overlapping/intersecting faces. If that is the case, it is necessary to either correct the errors (possibly a difficult and tedious task) or try a new chair.

LightUp is a remarkable renderer, but all renderers have trouble with malformed geometry.

cdl911
Posts: 14
Joined: Fri Nov 09, 2012 9:11 pm

Re: Help - weird behaviour on some furniture

Postby cdl911 » Mon Jul 31, 2017 10:50 am

Thank you Lee. Nailed it.

So i tried your method which did not fix the issue but make me look more closely at the geometry of the 3D warehouse chair. It had been built rather strangely and I was able to remove some components and it now lights BEAUTIFULLY!

Good tip, thanks,

Chris

stroudey
Posts: 1
Joined: Mon Apr 18, 2016 1:13 pm

Re: Help - weird behaviour on some furniture

Postby stroudey » Fri Oct 26, 2018 12:23 pm

This really helped. Thanks. I built a unit and had the same problem but thought I had built it perfectly. For the round corner unit I drew a quarter circle, closed it with a 90 degree corner and used the push/pull tool to extrude it. I did increase the amount of sides from default to 50 to make it look smoother, so maybe this is where it got complicated.

I applied Vertex Lit as suggested and it fixed every problem with dark areas in my model. Before and after pics below.
Screenshot 2018-10-26 at 12.57.01.png
Screenshot 2018-10-26 at 12.57.01.png (530.16 KiB) Viewed 2774 times
Screenshot 2018-10-26 at 13.14.35.png
Screenshot 2018-10-26 at 13.14.35.png (664.32 KiB) Viewed 2774 times


Thanks all.
Phil Stroud


Return to “Gallery”

Who is online

Users browsing this forum: No registered users and 2 guests

cron